Filters
Close

Roundline Downpipe Rainwater

Display per page

MFP Round 68mm Downpipe Black 5.5m

AP55BL
A rainwater downpipe is a pipe that is used to direct rainwater away from a building, typically from roof guttering to a drainage system.
£16.91 incl vat

MFP Round 68mm Downpipe Bracket

AC1BLRange
MFP Half Round Downpipe Bracket screws on to fascia board and grips gutter fittings. These are a practical, easy to install, and cost effective solution for both new build and refurbishment applications.
£1.31 incl vat

MFP Round 68mm Downpipe Connector

AS1BLRange
Downpipe connectors are used to connect two separate pieces of downpipe together, for example if your installation requires a downpipe of longer than the 2.4mtr lengths, this product can be used to connect them.
£2.26 incl vat

MFP Round 68mm Y Branch

AY1BLRange
Tough, durable and lightweight for easy installation. Cost-effective solution for both new build and refurbishment applications. Suitable for all building types.
£6.71 incl vat

MFP Round 68mm Downpipe 4m

AP4BLRange
MFP Round Downpipe is easy to use and suitable for both refurbishing existing pipework and new builds.
£11.81 incl vat

MFP Round 68mm Shoe

AB3BLRange
Downpipe shoes are used at the bottom of a rainwater pipe which is not connected directly to the drainage system or a soakaway.
£2.82 incl vat

MFP Round 68mm Offset

AB2BLRange
Two offset bends are used together to create the section generally known as a Swan Neck.
£1.63 incl vat

MFP Round 68mm Downpipe Bend 90 Degree

AB1BLRange
92.5 Degree Downpipe Bends are generally used instead of an offset bend where there is a deep soffit on a building or porch. The reason that these bends are 92.5 Degree and not 90 Degree is to create a slight fall to encourage a gentle flow of rainwater inside the pipe.
£1.57 incl vat