110mm Gullys, Chambers & Surrounds

MFP Universal Bottle Gully with a square adjustable top; suitable for accepting water from kitchens, ground floor bathrooms and similar waste area where they prevent any foul smelling air escaping from the system. Comes complete with polypropylene grid to prevent leaves and other debris entering the gully but also acts as a rodding point for cleaning.

Polypipe 110mm Back Inlet Hopper UG414B is used to collect surface water to drain away into the underground system. Comes complete with removeable polypropylene grid to prevent any debris from entering the drainage system.

Polypipe 110mm Plain Hopper UG414 is used to collect surface water to drain away into the underground system. Comes complete with removeable polypropylene grid to prevent any debris from entering the drainage system.

Polypipe 110mm Rectangular Hopper UG428 is used to collect surface water to drain away into the underground system. Comes complete with removeable polypropylene grid to prevent any debris from entering the drainage system.

Polypipe 110mm Square Gully Riser UG470 has been designed for use with the Polypipe square topped gullies.. It works to raise the gully to a higher level where necessary, for example in a raised patio.

Polypipe 110mm Universal Gully Traps UG413 are usually used externally alongside the house wall when introducing waste or rainwater pipes into a foul drain. They can also be used on surface water drains to collect rainwater from paved areas.

The Polypipe 320mm Inspection Chamber Base UG437 is a shallow inspection chamber base with 3 outlets which is designed to allow easy inspection and maintenance of the system.

Polypipe 320mm Inspection Chamber Concrete Lid UG439 is suitable for use with the Polypipe range of 320mm bases and risers. Comes complete with seal and fixing screws.

Polypipe 320mm Inspection Chamber Riser UG438 is for use with 320mm inspection chamber base.

The Polypipe 460mm Inspection Chamber Base UG440 is a shallow inspection chamber base with 3 outlets which is designed to allow easy inspection and maintenance of the system.

The Polypipe 460mm Inspection Chamber Base UG670 is a shallow inspection chamber base which is designed to allow easy inspection and maintenance of the system.

Polypipe 460mm Inspection Chamber Riser UG431 is for use with 460mm inspection chamber base.

Polypipe Back Inlet Round Bottle Gully UG427;usually used to accept water from kitchens, ground floor bathrooms and similar waste area where they prevent any foul smelling air escaping from the system

Polypipe Bottle Gully Square Surround UG426R for use with 110mm underground square bottle gully

Polypipe Round Bottle Gully Spare Grid Plastic UG426 for use with Polypipe Round Bottle gully UG425.

Polypipe Round Bottle Gully UG425; usually used to accept water from kitchens, ground floor bathrooms and similar waste area where they prevent any foul smelling air escaping from the system.

Polypipe Spare 9" x 6" Grid UG429 for use with Polypipe Round mm Rectangular Hopper UG428.

Polypipe Square Gully Grid Metal UG443 is an Aluminium 150mm Square Gully Grids for use with a square gully. e.g. UG414.

Polypipe's Round Bottle Gully Riser UG427R has been designed for use with the Polypipe UG425 or UG427 Gullies. It works to raise the gully to a higher level where necessary, for example in a raised patio.

Polypipe 320mm Round PVC Inspection Cover & Frame UG501 is suitable for use with the Polypipe range of 320mm bases and risers. Comes complete with seal and fixing screws.

Polypipe 320mm PVC Inspection Cover & Frame UG502 is suitable for use with the Polypipe ranges of 320mm bases and risers. Comes complete with seal and fixing screws.

Polypipe black plastic square gully grid UG415 is a plastic 150mm grids for use with a square gully. e.g. UG414.

Polypipe 110mm Aluminium 45deg Rodding Eye is used as an access point to the underground drain system. It allows for rodding and cleaning to clear any debris or blockages. The sealed oval top protects the drainage system and the spigot tail can be connected to the underground pipes easily.

Polypipe 110mm gully raising piece UG418 with square top for use Polypipe round bottle gully UG425 or any standard round 110mm bottle gully.

Nexus Access Chamber 450 x 450 x 150mm Riser Section is a unique patented twin-wall access chamber system which comprises of high-quality polypropylene modules that are assembled into ring sections before delivery. For ducts exceeding the standard 64mm and 114mm diameter entry points, the raising ring can be core-drilled on-site to accommodate all sizes of the duct.

Nexus Access Chamber 600 x 600 x 150mm Riser Section is a unique patented twin-wall access chamber system which comprises of high-quality polypropylene modules that are assembled into ring sections before delivery. For ducts exceeding the standard 64mm and 114mm diameter entry points, the raising ring can be core-drilled on-site to accommodate all sizes of the duct.

Nexus Access Chamber 450 x 450 x 150mm Duct Entry is a unique patented twin-wall access chamber system which comprises of high-quality polypropylene modules that are assembled into ring sections before delivery. The system offers to raise ring and duct entry ring sections. For ducts exceeding the standard 64mm and 114mm diameter entry points, the raising ring can be core-drilled on-site to accommodate all sizes of the duct.

Nexus Access Chamber 600 x 600 x 150mm Duct Entry is a unique patented twin-wall access chamber system which comprises of high-quality polypropylene modules that are assembled into ring sections before delivery. The system offers to raise ring and duct entry ring sections. For ducts exceeding the standard 64mm and 114mm diameter entry points, the raising ring can be core-drilled on-site to accommodate all sizes of the duct.